RUTX11 UDP Broadcast Relay — Teltonika Networks Docs

The information in this page is updated in accordance with firmware version RUTX_R_00.07.22.1.

Summary

This manual page provides an overview of UDP broadcast relay page in RUTX11 devices.

The UDP Broadcast Relay will listen for broadcast traffic on the specified interface port and relay that traffic to the specified interface(s).

Note: UDP Broadcast Relay is additional software that can be installed from the System → Package Manager page.

The relay list is empty by default. To add a new UDP broadcast relay click the 'Add' button.

Appears UDP broadcast relay, which should look similar to this:

Field	Value	Description
Source interface	lan \| wan; default: lan	The interface from which the traffic will be redirected to.
Port	integer [0..655353]; default: none	Specify a port which the UDP broadcast relay will listen on for incoming packets to relay.
Destination interface	lan \| wan; default: none	UDP broadcast relay destination interfaces.
Enabled	off \| on; default: off	Turns UDP Broadcast Relay on or off.
Actions	-(interactive button); default: Delete	Removes UDP Broadcast relay instance.